Construction equipment, building supplies India ads India, Construction equipment, building supplies classifieds India, Construction equipment, building supplies free ads India, ads for sale India, ads to buy India, FREEADS in India Page number 27-3

Celetronix India Pvt. Ltd Celetronix is a proven leader in the field of Electronic Manufacturing Services (EMS). Offering services from design and prototyping, through manufacturing and supply chain management, Celetronix is the strategic partner used by many of the world's most recognized brands in computers, home electronics, networking and server appliances, set-top satellite decoders and more.

We are Manufacturer & Supplier of ISI Safety Helmet in Yellow, Green..

We are engaged in manufacturing and export of Auto Level Equipment that is an ideal choice for surveying and engineering level applications hence obtaining correct accuracy levels. Features Robust construction Ensures complete accuracy for years under severe conditions Available in different models Provided with durable Lithium battery Ensures easy adjusting features Available in Aluminum telescopic tripod stand Includes hard-shell carrying case with dual latches, plumb bob, Allen wrench, adjusting pin, and instruction manual Ensures accurate levelling Portable.

Laboratory Concrete Mixer (Motorized) Our concrete mixer laboratory type is electrically operated are is designed to remove the burden- some work of hand mixing. We assure that these thoroughly uniform mixed batches are produced by us. In this, the counter balanced drum is easy to tilt 1.1/2 to 2cu.

The Vibrating Table is used for compacting concrete cubes and cylinders. Salient Features Specifications: It is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top.

We are one of the most trysted manufacturers and exporters of a precision engineered range of Moisture Measuring Meter that is used for measuring the moisture content in many substances such as wood and concrete. This non destructive type testing equipment is also used in measuring the moisture content of a building material and measure up to a range of 35% of moisture content.

We offer Vicat Needle Apparatus that is widely used in determining the normal consistency and setting time of cement. The test is undertaken by mixing cement with water and then measuring its resistance to penetration of a standard probe at varying intervals of time, until a certain value is reached..

We understand the fact that the strength of concrete is a very important aspect during construction, so we are offering compression testing instruments. Strength of any concrete is attained by crushing the specimen through cubes or cylinders. Our compression testing machine consists of Load Frame with suitable platens and a Pumping Unit with Pressure gauge, either had operated or electrically cum hand operated.

Backed by sophisticated infrastructure, we hold ability to manufacture and export best quality tile abrasion testing machines. These machines are extensively used for determining the resistance to wear for cement concrete flooring tiles. They are oad the specimen. The abrasion of tiles is measured on a thickness gouge specifically made for this purpose.

Our range of Sieve Shaker Machine is ideally suited for carrying out sieve analysis of different materials in dry conditions. Fabricated out of cast iron, the body of this machine is very robust and apt for functioning in the harsh conditions as well. Further, the base is made of M.S. Sheet, which ensures resistant to corrosion and the top rotating plate is constructed of cast aluminium complete with arrangement for fixing 8"/20 cm or 30 cm dia sieves with lid and receiver.

Test Sieves are used for sieving of aggregate, sand soil and cement etc. These sieves are manufactured as per various standards like ISS, BSS, ASTM, DIN etc. Sieves are made of Brass frame and G.I. frame of dia. 200mm, 300mm & 450mm. Normally Brass Sieves are manufactured in 200 cm dia and frame is spun brass, joint less.

We are manufacturers and exporters of Slump Cone that finds application in determining the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38 mm. This equipment consists of one slump cone with handles and foot pieces and ensures hassle free performance at all levels of operations.

For casting, concrete specimen for flexure tests Specification : Made of Cast Iron / Mild Steel. The mould are made of 4 plates assembled together. Each mould is supplied complete with base plate. Faces are machined flat to ± 0.2mm. And finished in size to 0.2mm. 10 CM X 10CM X 50CM 15CM X 15CM.

For testing concrete cylinders for compressive strength tests. Specification : The moulds is split vertically into two parts. The mean internal diameter in within /-0.2mm and height is within /-1mm. The ends are machined to /-0.05. The base plate and top plate are machined flat to /-0.03mm. Mould cylinder, cast iron, 15cm dia x 30cm height.

Cube Mould is used for cube testing purpose to find out strength of concrete. Size: 50mm x 50mm x 50mm.

We are manufacturers and exporters of precision engineered Cube Molds that ensures high level of accuracy in cement testing application and are very durable.Available as per technical details specified by the client, these cube molds are offered at industry leading prices. Size: 70.6mmx 70.6mm x 70.

We are one of the leading manufacturer, supplier & exporter of high quality ISI & Non ISI Cube Molds. These ISI marked cubes are used in Cube testing purpose. These cubes are available in both ISI and Non ISI standards as per the clients requirements. Size: 100mmx 100mm x 100mm.

Pumping CLC is performed easily peristaltic pumping equipment due to the lubricating effect of the bubbles in the concrete mix. Advantages: • No Seal, • No valve, • Self Priming, • Can Run Dry without Damage, • No Noise, No leakage, • Time Saving, Fuel Saving, • Energy.

We offer conveyor belt for Fly Ash & Cement..

Features: • Heavy Duty Motor – withstands voltage fluctuations From 180 V to 240 V • Deep fined Aluminum Alloy specially designed to keep temperature low and to minimize formation of carbon • Special Stainless Steel Material for high resistance, high efficiency & self floating • Compact.

This item is customized to meet requirement of wide range of Electrical Panels which are used in different applications and are available as per the needs. Features: • It having Push Button For ON/OFF motor , Conveyor • Mains Voltage Measuring Meter and Indication • Inbuilt Motor Starter, •.

We offer high quality of CLC Mould, which is used to make Bricks and Blocks. It is designed in compliance with International Standards using best class of raw materials under the guidance & supervision of skilled professionals. To meet the varied requirements of clients, we offer CLC Mould in diverse sizes.

Foam producing substance is called Foaming Agent, which is used in the manufacture of cellular concrete. This is a fully biodegradable protein-based concentrate, and when diluted in water and poured in Foam Generator and compressed with air, fine foam is generated and forms stable bubbles, which provides necessary porosity to the concrete.

Foam Mixer is used in Light Weight Concrete Block Manufacturing Plant and these are manufactured and supplied by Gaurav Enterprises. This Mixer consists of in-built water discharging system apart from Digital Weighing Scale. The structure of the Mixer is made of high gauge steel. The Shaft and other parts are made of alloy steel to bear high pressure of loads.

For Foam concrete production, Gaurav Enterprises manufacture Foam Generator, which is specially designed to get optimum output. This is used in Light Weight Concrete Block Manufacturing Plant. To cater to the Foam Generator, Foaming Agents of two types are available in the market. Specification: •.

Maximum High Pressure Tonnage: 40 Power Required : 16 HP (Main Press: 7.5 HP, Pan Mixer – 1 Nos. 7.5 HP, conveyor – 1 HP) Manufacturing Capacity : Fly Ash Bricks 6 to 8 pieces (in one operation) Facility : Fly ash bricks making machine single feeder facility for production of fly ash bricks Tank Capacity: 200 Liters.

Hydraulic Brick Press (70 TON) Auto Press Feeding System Press Feeder Bin Hydraulic Power pack system PLC based Control Panel Heavy Duty Pan Mixer No.2 Belt Conveyor System Brick Mould standard No.1 (8 cavity) Oil tank capacity 300 liter ELECTRICAL: 21 H.P. III PHASE CONNECTIONS. PRODUCTION: STANDARD BRICK 9, 000 TO 10, 000 / IN 8 HOURS.

Paver Block mahine 70 tonnage pressure ( without oil ) 5 H.P. Motor Pan Mixer : We are one the reputed manufacturers and exporters of Pan Mixer, which is a type of concrete mixer, that find application in construction industry. A perfect choice for mixing of cement homogeneously, along with sand or gravel and water to form concrete, this mixer consists of a revolving drum to mix the components.

Fully Automatic CLC Plant is highly appreciated for its rugged construction, better performance, low maintenance, noise free operations and corrosion resistance. These plants are generally suitable for higher production capacity. The advantages with these plants are less production cost, less lab our, better finish & curing.

Gubbi construction machines provide economical construction equipments. It requires minimum plastering & waterproofing. Cellular Light weight Concrete (CLC) blocks are environment friendly & manufactured from common natural raw material. help reduce dead weight of rise buildings. These blocks have lower water absorption.